Categories

Solar Powered Double Obstruction Warning Light

1.Integrated design, solar panel and lead acid battery built in;
2.High tech control chip,can precise control battery status;
3.Special LED chip, high light intensity, low power consumption;
4.High quality materials,apply to outdoor severe environment
Description

Specification 

 

Mode:

GS

Light source life:

>100000hours

Light source:

LED

Power supply:

Mono crystalline silicon solar panel

Battery capacity:

12V14AH

Battery type:

Lead acid battery

Battery life:

>3years

Solar panel power:

28w

Solar panel voltage:

16.5V

Solar panel life:

>20years

Power consumption:

≤0.5W

Vertical divergence:

>10°

Horizontal out-put:

360°

Visual range:

<5km

FAA classify:

L810

Overall size(mm):

380mm×370mm×325mm

Installation size(mm):

322mm×200mm×M8

Weight:

8Kg

Emitting color:

red

Storage temperature:

-40℃~70℃

Working temperature:

-20℃~60℃

Wind  load:

80m/s

Working mode:

Flashing/steady burning

Flashing/steady light intensity:

32.5cd

Protection Standard:

IP65

Continuous working time:

>15days(10hours a day)

Optically Controlled Ambient Brightness:  

300LUX±100LUX


Function & Features 
1.Continuous working time in rainy day can reach more than 15 days(10 hours a day) .
2.Photocell can switch ON/OFF the light in rainy days or at night automatically.
3.Can customize both lamp flashing synchronously or alternately.
4.Standardization of optical design, high photoelectric conversion efficiency.
5.Adopts special customized LED chip,transfer efficiency and service life is higher than normal LED.
6.Provide ability of lightning protection, light fastness, resist snow and rain.
7.Inner adopts replaceable solar lithium iron phosphate battery, whose service life can above 5 years.
8.With bird needle to prevent bird drop.
9.No radio frequency (rf), no electromagnetic interference.
10.Steady working, low cost.

Usage notice 
1.Please read the instruction carefully and then use the device correctly.
2.Solar powered Aviation obstruction light must be installed in a sunny place to keep it working continuously.
3.Please install this light on the Installation plane that perpendicular to light axis, installation plane should has mechanical strength.
4.If the device fails to work at the first using time, please place the device under sunlight to recharge power 12hours, it will work.
5.Please turn off the device and put it in a sunlight for 5day(s) to recharge power each 3 months if it needs to be stored for a long time.
6.If there any other problem please contact us.

Application 
Block
Airport
High Mast lamp
High-rise Buildings
Bridge
Telecom towers
Chimney

Dimension drawing 

Review

Shenzhen Green Source Light Equipment Co., Ltd © All Rights Reserved.