Categories

CAAC Approved Low-intensity Type A Aviation Obstruction Light

Item No.: TX-LA-01(L)
1. Casting aviation aluminum base, fully sealed structure.
2. High brightness SMT LED chip,reflecting optical structure.
3. Management circuit with Strong lightning protection.
4. With the surge protection device.
5. Conform to MH/T6012-2015 standard
Description
Specification 
 
Standard CAAC MH6012-2015 Aviation obstruction light
  ICAO ICAO Annex 14Volume I 6th Edition Airport design and operation
FAA classify L-810 Vertical Divergence 10°
Model TX-LA-01L Horizontal Out-put 360°
Power supply Optional AC220V, DC180V Overall Size 132*126*125mm
Power frequency 50HZ60HZ Installation size G3/4 cylindrical pipe thread
Power ≤2W Ambient Temperature -40℃55℃
Working mode Steady light Weight 1.1kg(Not include bracket )
Light intensity 10cd Photocell ambient brightness 50/100Lux
Light source LED Anti Wind Ability 240km/h
Light source life 20 years Protection grade IP65
Emitted color Red    

Features  
  1. Housing adopt high intensity casting aviation aluminum, fully sealed structure.
  2. Adopt high efficient SMT LED chip, which have the specific of high brightness, low power consumption and long long lifespan.
  3. Adopt with independent research and development advanced optical lighting system,Spotlight angle meets CAAC and ICAO requirements.
  4. With surge protection device, which can adopt to extremely bad working environment.
  5. Adopt advanced high high thermal conductive stoving varnish technology, which provide excellent heat dissipation, it can shortage lamp’s weight and volume efficiently
  6. With the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather.
  7. With over-current protection function.
  8. It can be customized functions of GPS Beidou wireless synchronization, LORA-10KM wireless sync, Remote control and telemetering.

Attention / Usage Tips 
  1. Don't use any out of nominal voltage,or will destroy equipment.
  2. Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
  3. After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
  4. Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt. 

Application 
Block, Airport, high-pole lamp, Chimney, Bridge, Towers, Communication tower, super high building.
 

Review

Shenzhen Green Source Light Equipment Co., Ltd © All Rights Reserved.