CAAC Approved High-intensity Type A Aviation Obstacle Light

Item No.: TX-HA-01(L)
1. Casting aviation aluminum shell, fully sealed structure.
2. High brightness SMT LED chip,combine double layers overlay reflective optical structure.
3. Management circuit with Strong lightning protection.
4. Conform to MH/T6012-2015 standard.
Standard CAAC MH6012-2015 Aviation obstruction light
  ICAO ICAO Annex 14Volume I 6th Edition Airport design and operation
FAA classify L-856 Vertical Divergence
Model TX-HA-01L Horizontal Out-put 90°
Power supply Optional AC220V, DC180V Overall Size 570*190*266mm 
Power frequency 50HZ60HZ Installation size 550*90*M10
Power 30W Ambient Temperature -40℃55℃
Working mode Flash 40times/min Weight 11.6kg(Not include bracket )
Light intensity 200020000cd Photocell ambient brightness 50/100Lux
Light source LED Anti Wind Ability 240km/h
Light source life ≥20 years Protection grade IP65
Emitted color white    

  1. Housing adopt high intensity casting aviation aluminum, fully sealed structure.
  2. Adopt high efficient SMT LED chip, which have the specific of high brightness, low power consumption and long long lifespan.
  3. Adopt with independent research and development advanced optical lighting systemSpotlight angle meets CAAC and ICAO requirements.
  4. With surge protection device, which can adopt to extremely bad working environment.
  5. Adopt advanced high high thermal conductive stoving varnish technology, which provide excellent heat dissipation, it can shortage lamp’s weight and volume efficiently
  6. With the impact resistance, anti lightning, resistant to sunlight, anti snow, can resist typhoons, hail and other severe weather.
  7. With over-current protection function.
  8. It can be customized functions of GPS Beidou wireless synchronization, LORA-10KM wireless sync, Remote control and telemetering.

Attention / Usage Tips 
  1. Don't use any out of nominal voltage,or will destroy equipment.
  2. Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
  3. After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
  4. Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt. 

Block, Airport, high-pole lamp, Chimney, Bridge, Towers, Communication tower, super high building.


Shenzhen Green Source Light Equipment Co., Ltd © All Rights Reserved.