Categories

FAA l810 Low intensity LED Aviation Obstruction Light

Item No.: GS-LI/B GS-LI/A
1. High intensity aviation aluminum casting chassis, IP67;
2. Low power consumption and long life LED chip ;
3. PC material Lampshade,resist corrosion,anti UV,anti shock ;
4. Lightning and surge protection;
5. Photoswitch,lighting on/off automatic.
Description

Specification 

 

FAA Classify:

L-810

Type:

GS-LI/B  GS-LI/A

Operating Voltage:

AC 110V/220V, DC 12V/24V/48V

Power Supply Frequency:

50Hz~60Hz

Power Consumption:

≤3W

Working Mode:

Steady burning, or flashing 20~60 times/min

Light Intensity:

Type B ≥32.5cd    Type A≥10cd

Horizontal Out-put:

360°

Vertical Divergence:

10°

Light Source Service Life:

≥20 years

Emitting Color:

Red 

Overall Size:

136mm×136mm×220mm

Installation Size:

 3/4inches or 1 inch, chassis install

IP Protection:

IP67

Optical Ambient Brightness:

50/100Lux

Ambient Temperature:

-40℃~70℃

Weight:

1.2kg

Anti-wind Ability:

120m/s


Features  
1.PC material with good impact protection strength, thermal stability, high transmittance.
2.Bird spike against bird drop.
3.International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100,000hours.
4.LED based on obstruction light last 15 times longer than traditional light source, incandescent light.
5.About 96% less power than 116W incandescent light.
6.Major maintenance cost saving,Surge protection device inside light.
7.Strong corrosion resistance, Shock and Vibrations protection and UV protection.
8.Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day.
9.3/4inch or 1inch installation size and small volume especially being suitable for telecom and flag-pole installation way.
10.There is one switch converting between Flashing mode and Steady-burning mode.
11.Two Years Warranty Period.

Attention / Usage Tips 
1.Check whether the supply voltage does comply with the rated voltage of device.
2.Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3.After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tight
4.Non-professional workers cannot do the device maintenance, in order not to expand the error and be hurt.

Application 
Block
Airport
High Mastlamp
Chimney
Bridge
Telecom towers, GSM towers, Electric towers
High-rise Buildings

Dimension drawing 

Shenzhen Green Source Light Equipment Co., Ltd © All Rights Reserved.