Categories

High Intensity Omni-directional Aviation Obstruction Light Type A and B

Item No.: GS-HI/O
1. Base structure is bake lacquer aluminum alloy, IP68;
2. 240pcs Low power consumption and long life LED chips ;
3. Tempered glass Lampshade,Omni-directional lighting ;
4. Lightning and surge protection;
5. Photoswitch,lighting on/off automatic.
Description
 

Specification 

Model:

GS-HI/O

FAA Standard:

L-856

Light intensity:

2000~100000cd(±25%)

Power Supply:

AC 110V/220V  DC48V/24V/12V

Power Supply Frequency:

50Hz~60Hz

Flash rate:

40-60times/minute

Continuous Working Time:

70ms

Service life of light source:

≥10years

Power consumption:

150W

Overall size(mm):

234mm×234mm×406mm

Installation size(mm):

180mm×180mm×M10

Vertical degree:

Horizontal degree:

360°

Optically Controlled Ambient Brightness:  

50cd-500cd/m2

Weight:

16Kg

Emitting color:

White

Ambient temperature:

-40℃~50℃

Wind load:

80m/s

Protection standard:

IP68

LED quantity:

240×10W

500cd/m²:

Type A 200000cd±25%,typeB 100,000cd±25%

50~500cd/m²:

20,000cd±25%

<50 cd/m²:

2,000cd±25%


Features 
1.Advanced optical projection lens design, emitting angle follow FAA standard.
2.With function of automatic light-control function, it can change light intensity class on daytime, rainy day and at night.
3.LED light source, its service life can above 100000 hours.
4.Low voltage design, high safety for maintenance and utilization.
5.Anti-shock,lightning protection, light fastness, anti-sleet,resist typhoons, the hail weather.
6.Adopts constant current circuit design, the longer service life.
7.Adopts changeable LED light source that can reduce the maintenance charge in the future.
8.No radio frequency (rf), no electromagnetic interference.
9.With lighting protection function
10.Adopts transparent glass cover which has the characteristics of high transmittance and chemical resistance,under the bad environment there will be no discoloration and cracking phenomenon.


Attention / Usage Tips 
1.Don't use any out of nominal voltage,or will destroy equipment.
2.
Do not open it if the device is out of operation, in order not to be hurt by the internal high pressure.
3.After finished the installation, the personnel must check whether the device is in a good waterproof processing and whether the screw spikes are tightened.
4.Non-professional workers can not do the device maintenance, in order not to expand the error and be hurt.

Application 
Block
Airport
Chimney
Iron towers
Bridge
Communication towers
High-rise Buildings



Dimension drawing 

Shenzhen Green Source Light Equipment Co., Ltd © All Rights Reserved.